While it may not work magic, a water sensor can work like magic in preventing potential disasters for your home. There’s nothing worse than coming home and unexpectedly finding a flood from a broken pipe or from bad weather. It often leads to irreparable damages to parts of the home and a whole lot of money taken out of your wallet to fix things. Better than leaving these things up to fate, consider the benefits of acquiring a water detector. It will let you know when water is detected where it shouldn’t be so that you can fix the situation before disaster strikes with irreversible damages.
Features of Water Sensors
- Alarm – There’s no point in having a sensor if you don’t know that it has sensed something. Therefore, a good water sensor will have an alarm on it that will either contact your security control panel system or call your phone when there’s a flood. Some will keep calling your phone until the alarm is answered – ensuring that you don’t miss the notification.
- Extendable – Some water detectors are extendable to allow full reachability to wherever you need them in the home, which is most convenient for detecting flooding. Others have long cables to allow extendibility.
- Easy installation and operation – Most water sensors are easy to install (usually requiring only a telephone jack) and take only double AA batteries. This means that they function when there’s no electricity, which is the next point.
- Workable when the power’s out – When there’s a power outage, usually a water sensor will still work (if it’s plugged into a telephone jack or battery operated). This is ideal for natural disasters that can cause both power outages and flooding, as you’ll be able to detect flooding even when the power is out.
- Basement – The basement is an excellent place to put a water sensor for a number of reasons. First, it’s the lowest part of the house, so if there’s flooding, it’ll probably be the first place to fill up. Second, it’s a place that you usually don’t spend a whole lot of time in, so chances are that if there IS a flood, you might not notice it for a while. And third, the basement is usually where the sump pump and hot water heater are located. These are two of the most likely water carriers to leak, which means they need close monitoring to avoid flooding.
- Bathroom – The second most important place to put a water detector is in the bathroom, because it’s the room in the house that sees the most water flow. Toilets, showers, bathtubs, sinks, any of these can have pipes bust or leak and cause flooding damage, so this room should be carefully monitored.
- Kitchen – This is also a place where flooding can happen, particularly near the sink, dishwasher, and fridge. Use a water sensor to keep an eye out for you in case you’re not around.
- Laundry room – The laundry room is the last main location where lots of water is distributed. It can also be left vacant for days on end (particularly if you don’t have a lot of people in your household), and so a flood can go undetected.
Best Places to Put Water Sensors
If you install a water sensor in each of these rooms in your house, it may save you thousands in repairs of property, pipes, and stress levels. Take our advice and look into putting water sensors in your home.